dmesg - USB 3.0
Booting Linux on physical CPU 0x100
Linux version 4.9.201-tegra (root@jimmyfang-virtual-machine) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Wed Jul 7 15:31:59 CST 2021
Boot CPU: AArch64 Processor [411fd073]
OF: fdt:memory scan node memory@80000000, reg size 80,
OF: fdt: - 80000000 , 70000000
OF: fdt: - f0200000 , 85600000
OF: fdt: - 175e00000 , 200000
OF: fdt: - 176600000 , 200000
OF: fdt: - 177000000 , 200000
earlycon: uart8250 at MMIO32 0x0000000003100000 (options '')
bootconsole [uart8250] enabled
Found tegra_fbmem: 00800000@96081000
Found lut_mem: 00002008@9607e000
OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB
OF: fdt:Reserved memory: failed to reserve memory for node 'fb2_carveout': base 0x0000000000000000, size 0 MiB
OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout
OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops
cma: Reserved 64 MiB at 0x00000000fc000000
On node 0 totalpages: 1004541
DMA zone: 8192 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 521725 pages, LIFO batch:31
Normal zone: 7624 pages used for memmap
Normal zone: 482816 pages, LIFO batch:31
psci: probing for conduit method from DT.
psci: PSCIv1.0 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: MIGRATE_INFO_TYPE not supported.
psci: SMC Calling Convention v1.1
percpu: Embedded 24 pages/cpu s57560 r8192 d32552 u98304
pcpu-alloc: s57560 r8192 d32552 u98304 alloc=24*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
Speculative Store Bypass Disable mitigation not required
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 988725
Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 video=tegrafb no_console_suspend=1 earlycon=uart8250,mmio32,0x3100000 nvdumper_reserved=0x1772e0000 gpt rootfs.slot_suffix= tegra_fbmem=0x800000@0x96081000 lut_mem=0x2008@0x9607e000 usbcore.old_scheme_first=1 tegraid=18.1.2.0.0 maxcpus=6 boot.slot_suffix= boot.ratchetvalues=0.2031647.1 vpr_resize bl_prof_dataptr=0x10000@0x175840000 sdhci_tegra.en_boot_part_access=1 quiet root=/dev/nvme0n1p1 rw rootwait rootfstype=ext4 console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0
log_buf_len individual max cpu contribution: 32768 bytes
log_buf_len total cpu_extra contributions: 163840 bytes
log_buf_len min size: 32768 bytes
log_buf_len: 262144 bytes
early log buf free: 29280(89%)
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Memory: 3147776K/4018164K available (15358K kernel code, 2952K rwdata, 6808K rodata, 8640K init, 635K bss, 116724K reserved, 753664K cma-reserved)
Virtual kernel memory layout:
modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
.text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB)
.rodata : 0xffffff8008f80000 - 0xffffff8009630000 ( 6848 KB)
.init : 0xffffff8009630000 - 0xffffff8009ea0000 ( 8640 KB)
.data : 0xffffff8009ea0000 - 0xffffff800a182008 ( 2953 KB)
.bss : 0xffffff800a182008 - 0xffffff800a220e5c ( 636 KB)
fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
0xffffffbf00000000 - 0xffffffbf03dc8000 ( 61 MB actual)
memory : 0xffffffc000000000 - 0xffffffc0f7200000 ( 3954 MB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
NR_IRQS:64 nr_irqs:64 0
GIC: Using split EOI/Deactivate mode
arm_arch_timer: Architected cp15 timer(s) running at 31.25MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xe6a171046, max_idle_ns: 881590405314 ns
sched_clock: 56 bits at 31MHz, resolution 32ns, wraps every 4398046511088ns
Console: colour dummy device 80x25
console [tty0] enabled
bootconsole [uart8250] disabled
kmemleak: Kernel memory leak detector disabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 62.50 BogoMIPS (lpj=125000)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
ftrace: allocating 47485 entries in 186 pages
sched-energy: Sched-energy-costs installed from DT
ASID allocator initialised with 65536 entries
tegra-id: chipid=21817.
tegra-id: opt_subrevision=1.
Tegra Revision: A02p SKU: 0xdc CPU Process: 0 SoC Process: 0
DTS File Name: /home/jimmyfang/Jetson/R32.5.1_TX2-NX/JetPack_4.5.1_Linux_JETSON_TX2_NX/Linux_for_Tegra/sources/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/lanai/kernel-dts/R32_5_1_TX2-NX_AIE-CT42_1.dts
DTB Build time: Jul 7 2021 15:32:19
CPU1: Booted secondary processor [4e0f0030]
CPU2: Booted secondary processor [4e0f0030]
CPU3: Booted secondary processor [411fd073]
CPU4: Booted secondary processor [411fd073]
CPU5: Booted secondary processor [411fd073]
Brought up 6 CPUs
SMP: Total of 6 processors activated.
CPU features: detected feature: 32-bit EL0 Support
CPU: All CPU(s) started at EL2
alternatives: patching kernel code
devtmpfs: initialized
Initilizing CustomIPI irq domain
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
OS set in device tree is not L4T.
regulator-dummy: no parameters
Initializing plugin-manager
Plugin module not found
Plugin-manager status disabled
NET: Registered protocol family 16
pstore: using zlib compression
console [pstore-1] enabled
pstore: Registered ramoops as persistent store backend
ramoops: attached 0x200000@0x175880000, ecc: 0/0
cpuidle: using governor menu
bpmp: waiting for handshake
bpmp: handshake completed
bpmp: synchronizing channels
bpmp: channels synchronized
bpmp: mail init ok
arm-smmu 12000000.iommu: probing hardware configuration...
arm-smmu 12000000.iommu: SMMUv2 with:
arm-smmu 12000000.iommu: stage 1 translation
arm-smmu 12000000.iommu: stage 2 translation
arm-smmu 12000000.iommu: nested translation
arm-smmu 12000000.iommu: stream matching with 128 register groups, mask 0x7f80
arm-smmu 12000000.iommu: SMMU address space size (0x800000) differs from mapped region size (0x1000000)!
arm-smmu 12000000.iommu: 64 context banks (0 stage-2 only)
arm-smmu 12000000.iommu: Stage-1: 39-bit VA -> 48-bit IPA
arm-smmu 12000000.iommu: Stage-2: 39-bit IPA -> 48-bit PA
vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009ea4000)
hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations
Registering BPMP clocks...
tegra_bpmp_clk_init: clock init ok (638 clks)
tegra_powergate_init: DONE
DTS File Name: /home/jimmyfang/Jetson/R32.5.1_TX2-NX/JetPack_4.5.1_Linux_JETSON_TX2_NX/Linux_for_Tegra/sources/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t18x/lanai/kernel-dts/R32_5_1_TX2-NX_AIE-CT42_1.dts
DTB Build time: Jul 7 2021 15:32:19
Tegra reboot handler registered.
tegra-pmc c360000.pmc: scratch reg offset dts data not present
tegra-pmc: get_secure_pmc_setting: done secure_pmc=0
tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET
tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_L1
tegra-pmc: ### PMC reset status reg: 0x2d
padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered
tegra-pmc c360000.pmc: IO padctrl driver initialized
iommu: Adding device 3460000.sdhci to group 0
iommu: Adding device 3160000.i2c to group 1
iommu: Adding device c240000.i2c to group 2
iommu: Adding device 3180000.i2c to group 3
iommu: Adding device 3190000.i2c to group 4
iommu: Adding device 31b0000.i2c to group 5
iommu: Adding device 31c0000.i2c to group 6
iommu: Adding device c250000.i2c to group 7
iommu: Adding device 31e0000.i2c to group 8
iommu: Adding device 3210000.spi to group 9
iommu: Adding device 3240000.spi to group 10
iommu: Adding device 3100000.serial to group 11
iommu: Adding device 3110000.serial to group 12
iommu: Adding device c280000.serial to group 13
iommu: Adding device 3130000.serial to group 14
iommu: Adding device 2490000.ether_qos to group 15
arm-smmu: forcing sodev map for 2490000.ether_qos
iommu: Adding device b000000.rtcpu to group 16
iommu: Adding device 13e10000.host1x to group 17
iommu: Adding device 13e10000.host1x:ctx0 to group 18
iommu: Adding device 13e10000.host1x:ctx1 to group 19
iommu: Adding device 13e10000.host1x:ctx2 to group 20
iommu: Adding device 13e10000.host1x:ctx3 to group 21
iommu: Adding device 13e10000.host1x:ctx4 to group 22
iommu: Adding device 13e10000.host1x:ctx5 to group 23
iommu: Adding device 13e10000.host1x:ctx6 to group 24
iommu: Adding device 13e10000.host1x:ctx7 to group 25
iommu: Adding device 150c0000.nvcsi to group 26
iommu: Adding device 15700000.vi to group 27
iommu: Adding device 15600000.isp to group 28
iommu: Adding device 15200000.nvdisplay to group 29
platform 15200000.nvdisplay: OF IOVA linear map 0x96081000 size (0x800000)
platform 15200000.nvdisplay: OF IOVA linear map 0x9607e000 size (0x2008)
iommu: Adding device 15210000.nvdisplay to group 30
platform 15210000.nvdisplay: OF IOVA linear map 0x96081000 size (0x800000)
arm__alloc_iova_at():136: iova alloc don't match, dh=0x0000000096081000, da=0x000000009587e000
platform 15210000.nvdisplay: OF IOVA linear map 0x9607e000 size (0x2008)
arm__alloc_iova_at():136: iova alloc don't match, dh=0x000000009607e000, da=0x000000009607b000
iommu: Adding device 15340000.vic to group 31
iommu: Adding device 154c0000.nvenc to group 32
iommu: Adding device 15480000.nvdec to group 33
iommu: Adding device 15380000.nvjpg to group 34
iommu: Adding device 15500000.tsec to group 35
iommu: Adding device 15100000.tsecb to group 36
iommu: Adding device 15810000.se to group 37
iommu: Adding device 15820000.se to group 38
iommu: Adding device 15830000.se to group 39
iommu: Adding device 15840000.se to group 40
iommu: Adding device smmu_test to group 41
mc: mapped MMIO address: 0xffffff800a710000 -> 0x2c10000
mc: mapped MMIO address: 0xffffff800a730000 -> 0x2c20000
mc: mapped MMIO address: 0xffffff800a750000 -> 0x2c30000
mc: mapped MMIO address: 0xffffff800a770000 -> 0x2c40000
mc: mapped MMIO address: 0xffffff800a790000 -> 0x2c50000
nv-tegra-mc 2c10000.mc: No mssnvlink node
mc-err: mcerr ops are set to t18x
dram-ecc: DRAM ECC disabled-MC_ECC_CONTROL:0x0000000c
iommu: Adding device 3530000.xhci to group 42
arm-smmu: forcing sodev map for 3530000.xhci
iommu: Adding device 3550000.xudc to group 43
arm-smmu: forcing sodev map for 3550000.xudc
tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_83 = 0x10a
tegra186-aowake c370000.pmc: WAKE_AOWAKE_CTRL_0 = 3
tegra186-aowake c370000.pmc: WAKE_AOWAKE_CNTRL_24(PMU_INT) = 256
iommu: Adding device 17000000.gp10b to group 44
tegra-reset 5000000.clock: registered 193 resets.
iommu: Adding device d000000.bpmp to group 45
bpmp: ping status is 0
bpmp d000000.bpmp: firmware tag is 91572a54614f84d0fd0c270beec2c56f
bpmp d000000.bpmp: probe ok
iommu: Adding device 2600000.dma to group 46
GPIO line 424 (camera-control-output-low) hogged as output/low
GPIO line 427 (camera-control-output-low) hogged as output/low
GPIO line 408 (w-disable1) hogged as output/high
GPIO line 410 (w-disable2) hogged as output/high
gpiochip_setup_dev: registered GPIOs 320 to 511 on device: gpiochip0 (tegra-gpio)
gpiochip_setup_dev: registered GPIOs 256 to 319 on device: gpiochip1 (tegra-gpio-aon)
iommu: Adding device 10003000.pcie-controller to group 47
arm-smmu: forcing sodev map for 10003000.pcie-controller
iommu: Adding device sound to group 48
iommu: Adding device 3510000.hda to group 49
iommu: Adding device c1a0000.aon to group 50
vdd-1v8-ap: 1800 mV
vdd-ac-bat: 5000 mV
vdd-3v3-cvb: 3300 mV
vdd-3v3-cvb: 3300 mV
vdd-3v3-cvb: Failed to create debugfs directory
vdd-1v8-cvb: 1800 mV
vdd-fan: 5000 mV
vdd-hdmi-5v0: 5000 mV
vdd_sys_en: 1200 mV
random: fast init done
HugeTLB registered 2 MB page size, pre-allocated 0 pages
eventlib_kernel: keventlib is initialized, test id: 0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
max77620 4-003c: PMIC Version OTP:0x45 and ES:0x8
vddio-ddr: at 1125 mV
avdd_dsi_csi: 1200 mV
vdd-1v8: 1800 mV
vdd-3v3-sys: 3300 mV
spmic-ldo0: at 1800 mV
spmic-ldo1: at 800 mV
vddio-3v3: 3300 mV
vddio-sdmmc1: 1800 3300 mV at 3300 mV
vdd-rtc: at 800 mV
avdd-ts-hv: 1800 3300 mV at 1800 mV
spmic-ldo6: at 800 mV
vdd-pex-1v00: 1000 mV
dvdd-pex: 1000 mV
GPIO line 253 (spmic_gpio_input) hogged as input
GPIO line 254 (spmic_gpio_input) hogged as input
gpiochip_setup_dev: registered GPIOs 248 to 255 on device: gpiochip2 (max77620-gpio)
max77620 4-003c: max77620 probe successful
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
tegra_wdt_t18x 30c0000.watchdog: Expiry count is deprecated
tegra_wdt_t18x 30c0000.watchdog: Tegra WDT init timeout = 120 sec
tegra_wdt_t18x 30c0000.watchdog: Registered successfully
trusty trusty: trusty version: Built: 08:40:58 Feb 19 2021
trusty trusty: selected api version: 3 (requested 3)
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
vdd-sys-bl: 3300 mV
camchar: rtcpu character device driver loaded
gpio tegra-gpio wake61 for gpio=92(L:4)
extcon-gpio-states external-connection:extcon@1: Cable state:1, cable id:1
clocksource: Switched to clocksource arch_sys_counter
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
nvmap_heap_init: nvmap_heap_init: created heap block cache
dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000c6000000, size=0x2a000000
cma: enabled page replacement for spfn=c6000, epfn=f0000
dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful
nvmap: nvmap_select_cache_ops() nvmap cache ops set to roc
nvmap_page_pool_init: Total RAM pages: 975360
nvmap_page_pool_init: nvmap page pool size: 121920 pages (476 MB)
nvmap_background_zero_thread: PP zeroing thread starting.
misc nvmap: created heap vpr base 0x00000000c6000000 size (688128KiB)
tegra-gpcdma 2600000.dma: GPC DMA driver register 32 channels
thermal thermal_zone0: Registering thermal zone thermal_zone0 for type BCPU-therm
thermal thermal_zone1: Registering thermal zone thermal_zone1 for type MCPU-therm
thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm
thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm
thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die
la/ptsa driver initialized.
pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz
pre_t19x_iso_plat_init(): max_iso_bw=23040000KB
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 7064K
host1x 13e10000.host1x: initialized
hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(0.776:1): initialized
workingset: timestamp_bits=46 max_order=20 bucket_order=0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
ntfs: driver 2.1.32 [Flags: R/W].
9p: Installing v9fs 9p2000 file system support
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240)
io scheduler noop registered
io scheduler cfq registered (default)
gic 2a41000.agic-controller: GIC IRQ controller registered
iommu: Adding device aconnect@2a41000:adsp_audio to group 51
iommu: Adding device 2993000.adsp to group 52
tegra-aconnect aconnect@2a41000: Tegra ACONNECT bus registered
tegra-pwm 3280000.pwm: PWM clk can sleep in ops
tegra-pwm 3290000.pwm: PWM clk can sleep in ops
tegra-pwm 32a0000.pwm: PWM clk can sleep in ops
tegra-pwm c340000.pwm: PWM clk can sleep in ops
tegra-pcie 10003000.pcie-controller: 2x1, 1x1, 1x1 configuration
tegra-pcie 10003000.pcie-controller: PCIE: Enable power rails
tegra-pcie 10003000.pcie-controller: probing port 0, using 2 lanes
tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe
misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000
tegra-pcie 10003000.pcie-controller: probing port 2, using 1 lanes
tsec 15500000.tsec: initialized
tsec 15100000.tsecb: initialized
nvdec 15480000.nvdec: initialized
falcon 15340000.vic: initialized
falcon 154c0000.nvenc: initialized
falcon 15380000.nvjpg: initialized
iommu_context_dev 13e10000.host1x:ctx0: initialized (streamid=56)
iommu_context_dev 13e10000.host1x:ctx1: initialized (streamid=57)
iommu_context_dev 13e10000.host1x:ctx2: initialized (streamid=58)
iommu_context_dev 13e10000.host1x:ctx3: initialized (streamid=59)
iommu_context_dev 13e10000.host1x:ctx4: initialized (streamid=60)
iommu_context_dev 13e10000.host1x:ctx5: initialized (streamid=61)
iommu_context_dev 13e10000.host1x:ctx6: initialized (streamid=62)
iommu_context_dev 13e10000.host1x:ctx7: initialized (streamid=63)
tegradccommon 15200000.dc_common: host1x channel mapped
tegradccommon 15200000.dc_common: dc_common syncpt # 1 allocated
tegradccommon 15200000.dc_common: dma mapping done
tegradc 15200000.nvdisplay: disp0 connected to head0->/host1x/sor1
generic_infoframe_type: 0x87
tegradc 15200000.nvdisplay: DT parsed successfully
tegradc 15200000.nvdisplay: Display dc.ffffff800abe0000 registered with id=0
tegra_nvdisp_bandwidth_register_max_config: max config iso bw = 16727000 KB/s
tegra_nvdisp_bandwidth_register_max_config: max config EMC floor = 665600000 Hz
tegra_nvdisp_bandwidth_register_max_config: max config hubclk = 357620000 Hz
tegradc 15200000.nvdisplay: vblank syncpt # 8 for dc 0
tegradc 15200000.nvdisplay: vpulse3 syncpt # 9 for dc 0
tegradc 15200000.nvdisplay: Bootloader disp_param detected. Detected mode: 1920x1080 (on 0x0mm) pclk=148350937
tegradc 15200000.nvdisplay: hdmi: invalid prod list prod_list_hdmi_board
tegradc 15200000.nvdisplay: hdmi: tegra_hdmi_tmds_range_read(bd) failed
tegra-adma 2930000.adma: Tegra210 ADMA driver registered 32 channels
tegradc 15200000.nvdisplay: probed
tegra-fuse-burn 3820000.efuse:efuse-burn: shutdown limit check disabled
tegra-fuse-burn 3820000.efuse:efuse-burn: Fuse burn driver initialized
kfuse 3830000.kfuse: initialized
tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0
console [ttyS0] disabled
Console: switching to colour frame buffer device 240x67
tegradc 15200000.nvdisplay: fb registered
gpio tegra-gpio wake21 for gpio=121(P:1)
tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd
tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd
Parent Clock set for DC plld2
console [ttyS0] enabled
[drm] Initialized
brd: module loaded
loop: module loaded
tegra_profiler: version: 1.143, samples/io: 48/28
tegra_profiler: auth: init
THERMAL EST: found 3 subdevs
THERMAL EST num_resources: 0
[THERMAL EST subdev 0]
[THERMAL EST subdev 1]
[THERMAL EST subdev 2]
THERMAL EST: Found 2 profiles, default profile is quiet
thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est
THERMAL EST: thz register success.
tegradc 15200000.nvdisplay: hdmi: tmds rate:148351K prod-setting:prod_c_hdmi_111m_223m
tegradc 15200000.nvdisplay: hdmi: get RGB quant from REG programmed by BL.
tegradc 15200000.nvdisplay: hdmi: get YCC quant from REG programmed by BL.
THERMAL EST: end of probe, return err: 0
sd: No Scsi addr parsed to reserve index
hisi_sas: driver version v1.6
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
CAN device driver interface
Message RAM Configuration
| base addr |0x0c312000|
| sidfc_flssa |0x00000000|
| xidfc_flesa |0x00000040|
| rxf0c_f0sa |0x000000c0|
| rxf1c_f1sa |0x000009c0|
| rxbc_rbsa |0x000009c0|
| txefc_efsa |0x000009c0|
| txbc_tbsa |0x00000a40|
| tmc_tmsa |0x00000ec0|
Release 3.2.0 from 19.12.2014
net can0: mttcan device registered (regs=ffffff800a5ea000, irq=384)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4
Copyright(c) 1999 - 2017 Intel Corporation.
extcon-disp-state external-connection:disp-state: cable 47 state 1
Extcon AUX1(HDMI) enable
tegradc 15210000.nvdisplay: disp1 connected to head1->/host1x/sor
tegradc 15210000.nvdisplay: DT parsed successfully
tegradc 15210000.nvdisplay: Display dc.ffffff800afd0000 registered with id=1
tegradc 15210000.nvdisplay: vblank syncpt # 11 for dc 1
tegradc 15210000.nvdisplay: vpulse3 syncpt # 12 for dc 1
tegradc 15210000.nvdisplay: probed
tegradc 15210000.nvdisplay: fb registered
hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1
hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset)
hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0
tegradc 15210000.nvdisplay: blank - powerdown
extcon-disp-state external-connection:disp-state: cable 44 state 0 already set.
Extcon DP: HPD disabled
hpd: hpd_switch 0
hpd: switching from state 0 (Reset) to state 1 (Check Plug)
hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0
hpd: switching from state 1 (Check Plug) to state 3 (Disabled)
tegradc 15200000.nvdisplay: blank - powerdown
extcon-disp-state external-connection:disp-state: cable 47 state 0
Extcon AUX1(HDMI) disable
tegra_nvdisp_handle_pd_disable: Powergated Head1 pd
tegra_nvdisp_handle_pd_disable: Powergated Head0 pd
tegradc 15200000.nvdisplay: unblank
tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd
tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd
Parent Clock set for DC plld2
tegradc 15200000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m
tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID.
eqos 2490000.ether_qos: can't get pllrefe_vcoout clk (-2)
eqos 2490000.ether_qos: failed to read eqos_auto_cal_config_0_reg
eqos 2490000.ether_qos: Setting local MAC: 48 b0 2d 3b 72 ac
libphy: dwc_phy: probed
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
usbcore: registered new interface driver r8152
usbcore: registered new interface driver asix
usbcore: registered new interface driver ax88179_178a
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver net1080
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver cdc_ncm
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
tegra-xusb 3530000.xhci: USB2 port 0 has OTG_CAP
tegra-xusb 3530000.xhci: extcon 0: ffffffc0efa19c00 id
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial
tegra-xusb 3530000.xhci: Firmware timestamp: 2019-10-31 05:52:15 UTC, Version: 55.17 release
tegra-xusb 3530000.xhci: xHCI Host Controller
tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 1
tegra-xusb 3530000.xhci: hcc params 0x0184fd25 hci version 0x100 quirks 0x00050810
tegra-xusb 3530000.xhci: irq 67, io mem 0x03530000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.9.201-tegra xhci-hcd
usb usb1: SerialNumber: 3530000.xhci
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
tegra-xusb 3530000.xhci: xHCI Host Controller
tegra-xusb 3530000.xhci: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.9.201-tegra xhci-hcd
usb usb2: SerialNumber: 3530000.xhci
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
Wake76 for irq=199
Wake77 for irq=199
Wake78 for irq=199
Wake79 for irq=199
Wake80 for irq=199
Wake81 for irq=199
Wake82 for irq=199
tegra-xusb 3530000.xhci: Upgrade port 0 to USB3.0
tegra-xusb 3530000.xhci: Upgrade port 1 to USB3.0
tegra-xudc-new 3550000.xudc: device count: 1
tegra-xudc-new 3550000.xudc: USB charger detection disabled
tegra-xudc-new 3550000.xudc: vbus state: 1
tegra-xudc-new 3550000.xudc: device mode on: 0
tegra-xudc-new 3550000.xudc: active: 0 => 1
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver xpad
extcon-disp-state external-connection:disp-state: cable 47 state 1
Extcon AUX1(HDMI) enable
tegra-pcie 10003000.pcie-controller: link 2 down, retrying
tegradc 15200000.nvdisplay: sync windows ret = 247
extcon-disp-state external-connection:disp-state: cable 51 state 1
Extcon HDMI: HPD enabled
tegradc 15200000.nvdisplay: hdmi: plugged
usb usb2: usb_suspend_both: status 0
max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0
Wake73 for irq=42
rtc rtc1: alarm rtc device
tegra_rtc c2a0000.rtc: rtc core: registered c2a0000.rtc as rtc1
tegra_rtc c2a0000.rtc: Tegra internal Real Time Clock
i2c /dev entries driver
i2c i2c-2: Added multiplexed i2c bus 9
i2c i2c-2: Added multiplexed i2c bus 10
i2c-mux-gpio cam_i2cmux: 2 port mux on 3180000.i2c adapter
imx219 9-0010: tegracam sensor driver:imx219_v2.0.6
tegra-i2c 3180000.i2c: no acknowledge from address 0x10
imx219 9-0010: imx219_board_setup: error during i2c read probe (-121)
imx219 9-0010: board setup failed
imx219: probe of 9-0010 failed with error -121
imx219 10-0010: tegracam sensor driver:imx219_v2.0.6
tegra-i2c 3180000.i2c: no acknowledge from address 0x10
imx219 10-0010: imx219_board_setup: error during i2c read probe (-121)
imx219 10-0010: board setup failed
imx219: probe of 10-0010 failed with error -121
max77620-power max77620-power: Event recorder REG_NVERC : 0x0
parse_throttle_dt_data: Num cap clks = 4
parse_throttle_dt_data: clk=mcpu type=1
parse_throttle_dt_data: clk=bcpu type=2
parse_throttle_dt_data: clk=gpu type=4
parse_throttle_dt_data: clk=emc type=3
tegra_throttle_probe: probe successful. #cdevs=4
FAN dev name: pwm-fan
FAN:gpio request success.
FAN: can't find tach_gpio
pwm_fan_driver pwm-fan: Found 2 profiles, default profile is quiet
pwm_fan_driver pwm-fan: cap state:4, cap pwm:255
pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal
pwm_fan_driver pwm-fan: tach period: 1000
pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2
pwm_fan_driver pwm-fan: index 1: pwm=130, rpm=1000, rru=2, rrd=2, state:2
pwm_fan_driver pwm-fan: index 2: pwm=160, rpm=2000, rru=1, rrd=1, state:2
pwm_fan_driver pwm-fan: index 3: pwm=200, rpm=3000, rru=1, rrd=1, state:2
pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3
pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3
pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3
pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4
pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4
pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
CPU EMC frequency mapping table: from device tree
cpufreq: platform driver Initialization: pass
cpuidle: Initializing cpuidle driver init for Denver cluster
cpuidle: Initializing cpuidle driver init for A57 cluster
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
sdhci-tegra 3460000.sdhci: Client registration for eMC Successful
CMDQ: cmdq_platfm_init successful
CQE: CMD_TIMING bit set for R1B DCMD
tegra-se-elp 3ad0000.se_elp: tegra_se_elp_probe: complete
tegra-se-nvhost 15810000.se: initialized
tegra-se-nvhost 15810000.se: tegra_se_probe: complete
tegra-se-nvhost 15820000.se: initialized
tegra-se-nvhost 15820000.se: tegra_se_probe: complete
tegra-se-nvhost 15830000.se: initialized
tegra-se-nvhost 15830000.se: tegra_se_probe: complete
tegra-se-nvhost 15840000.se: initialized
tegra-se-nvhost 15840000.se: tegra_se_probe: complete
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
tegra186-cam-rtcpu b000000.rtcpu: Trace buffer configured at IOVA=0xbff00000
tegra-ivc ivc-b000000.rtcpu: region 0: iova=0xbfef0000-0xbfefdb7f size=56192
tegra-ivc ivc-b000000.rtcpu:echo@0: echo: ver=0 grp=1 RX[16x64]=0x1000-0x1480 TX[16x64]=0x1480-0x1900
tegra-ivc ivc-b000000.rtcpu:vinotify@12c0: vinotify: ver=0 grp=1 RX[64x128]=0x1900-0x3980 TX[64x128]=0x3980-0x5a00
tegra-ivc ivc-b000000.rtcpu:mods@32c0: mods: ver=0 grp=1 RX[1x64]=0x5a00-0x5ac0 TX[1x64]=0x5ac0-0x5b80
tegra-ivc ivc-b000000.rtcpu:ivccontrol@52c0: ivccontrol: ver=0 grp=1 RX[16x320]=0x5b80-0x7000 TX[16x320]=0x7000-0x8480
tegra-ivc ivc-b000000.rtcpu:ivccapture@72c0: ivccapture: ver=0 grp=1 RX[16x64]=0x8480-0x8900 TX[16x64]=0x8900-0x8d80
tegra-ivc ivc-b000000.rtcpu:dbg@7c00: dbg: ver=0 grp=1 RX[1x384]=0x8d80-0x8f80 TX[1x384]=0x8f80-0x9180
tegra-ivc ivc-b000000.rtcpu:dbg@7e00: dbg: ver=0 grp=1 RX[1x8192]=0x9180-0xb200 TX[1x8192]=0xb200-0xd280
tegra186-cam-rtcpu b000000.rtcpu: using cam RTCPU IRQ (47)
tegra186-cam-rtcpu b000000.rtcpu: tegra_camrtc_mon_create is successful
tegra186-cam-rtcpu b000000.rtcpu: firmware version cpu=sce cmd=5 sha1=3ecb1dca25fa98771f988f238c025334776c9a96
tegra_aon c1a0000.aon: tegra aon driver probe OK
tegra186-aondbg aondbg: aondbg driver probe() OK
register_ari_mca_banks: Registered MCA ROC:IOB
register_ari_mca_banks: Registered MCA ROC:CCE
tegra18-bridge 2390000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds
tegra18-bridge 2390000.axi2apb: enabled timeout = 9894000
tegra18-bridge 2390000.axi2apb: bridge probed OK
tegra18-bridge 23a0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds
tegra18-bridge 23a0000.axi2apb: enabled timeout = 9894000
tegra18-bridge 23a0000.axi2apb: bridge probed OK
tegra18-bridge 23b0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds
tegra18-bridge 23b0000.axi2apb: enabled timeout = 9894000
tegra18-bridge 23b0000.axi2apb: bridge probed OK
tegra18-bridge 23c0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds
tegra18-bridge 23c0000.axi2apb: enabled timeout = 9894000
tegra18-bridge 23c0000.axi2apb: bridge probed OK
tegra18-bridge 23d0000.axi2apb: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds
tegra18-bridge 23d0000.axi2apb: enabled timeout = 9894000
tegra18-bridge 23d0000.axi2apb: bridge probed OK
tegra18-bridge 2100000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds
tegra18-bridge 2100000.axip2p: enabled timeout = 9894000
tegra18-bridge 2100000.axip2p: bridge probed OK
tegra18-bridge 2110000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds
tegra18-bridge 2110000.axip2p: enabled timeout = 9894000
tegra18-bridge 2110000.axip2p: bridge probed OK
tegra18-bridge 2120000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds
tegra18-bridge 2120000.axip2p: enabled timeout = 9894000
tegra18-bridge 2120000.axip2p: bridge probed OK
tegra18-bridge 2130000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds
tegra18-bridge 2130000.axip2p: enabled timeout = 9894000
tegra18-bridge 2130000.axip2p: bridge probed OK
tegra18-bridge 2140000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds
tegra18-bridge 2140000.axip2p: enabled timeout = 9894000
tegra18-bridge 2140000.axip2p: bridge probed OK
tegra18-bridge 2150000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds
tegra18-bridge 2150000.axip2p: enabled timeout = 9894000
tegra18-bridge 2150000.axip2p: bridge probed OK
tegra18-bridge 2160000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds
tegra18-bridge 2160000.axip2p: enabled timeout = 9894000
tegra18-bridge 2160000.axip2p: bridge probed OK
tegra18-bridge 2170000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds
tegra18-bridge 2170000.axip2p: enabled timeout = 9894000
tegra18-bridge 2170000.axip2p: bridge probed OK
tegra18-bridge 2180000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds
tegra18-bridge 2180000.axip2p: enabled timeout = 9894000
tegra18-bridge 2180000.axip2p: bridge probed OK
tegra18-bridge 2190000.axip2p: axi_cbb clk rate = 102 MHZ, timeout = 97000 useconds
tegra18-bridge 2190000.axip2p: enabled timeout = 9894000
tegra18-bridge 2190000.axip2p: bridge probed OK
tegra18_a57_serr_init: on CPU 1 a Denver Core
tegra18x_actmon d230000.actmon: in actmon_register()...
tegra18x_actmon d230000.actmon: initialization Completed for the device mc_all
hw perfevents: enabled with denver15_uncore_pmu PMU driver, 3 counters available
denver_knobs_init:MTS_VERSION:47926945
nvpmodel: initialized successfully
trusty-virtio trusty:virtio: initializing
trusty_ipc virtio0: vring0: va(pa) ffffffc0e9d32000(0) qsz 32 notifyid 1
trusty_ipc virtio0: vring1: va(pa) ffffffc0e9d40000(0) qsz 32 notifyid 2
trusty-virtio trusty:virtio: initializing done
trusty_ipc virtio0: is online
usbcore: registered new interface driver snd-usb-audio
mmc0: SDHCI controller on 3460000.sdhci [3460000.sdhci] using ADMA 64-bit with 64 bit addr
input: tegra-hda HDMI/DP,pcm=3 as /devices/3510000.hda/sound/card0/input0
input: tegra-hda HDMI/DP,pcm=7 as /devices/3510000.hda/sound/card0/input1
OPE platform probe
OPE platform probe successful
mmc0: mmc_decode_ext_csd: CMDQ supported: depth: 31, cmdq_support: 1
usb 1-2: new high-speed USB device number 2 using tegra-xusb
mmc0: periodic cache flush enabled
mmc0: new HS400 Enhanced strobe MMC card at address 0001
mmcblk0: mmc0:0001 DG4016 14.7 GiB
mmcblk0boot0: mmc0:0001 DG4016 partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 DG4016 partition 2 4.00 MiB
mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB
mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33
usb 1-2: New USB device found, idVendor=0451, idProduct=8027
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=1
usb 1-2: SerialNumber: 900408617489
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 2 ports detected
tegra-asoc: sound: ADMAIF1 ADMAIF1 mapping ok
tegra-asoc: sound: ADMAIF2 ADMAIF2 mapping ok
tegra-asoc: sound: ADMAIF3 ADMAIF3 mapping ok
tegra-asoc: sound: ADMAIF4 ADMAIF4 mapping ok
tegra-asoc: sound: ADMAIF5 ADMAIF5 mapping ok
tegra-asoc: sound: ADMAIF6 ADMAIF6 mapping ok
tegra-asoc: sound: ADMAIF7 ADMAIF7 mapping ok
tegra-asoc: sound: ADMAIF8 ADMAIF8 mapping ok
tegra-asoc: sound: ADMAIF9 ADMAIF9 mapping ok
tegra-asoc: sound: ADMAIF10 ADMAIF10 mapping ok
tegra-asoc: sound: ADMAIF11 ADMAIF11 mapping ok
tegra-asoc: sound: ADMAIF12 ADMAIF12 mapping ok
tegra-asoc: sound: ADMAIF13 ADMAIF13 mapping ok
tegra-asoc: sound: ADMAIF14 ADMAIF14 mapping ok
tegra-asoc: sound: ADMAIF15 ADMAIF15 mapping ok
tegra-asoc: sound: ADMAIF16 ADMAIF16 mapping ok
tegra-asoc: sound: ADMAIF17 ADMAIF17 mapping ok
tegra-asoc: sound: ADMAIF18 ADMAIF18 mapping ok
tegra-asoc: sound: ADMAIF19 ADMAIF19 mapping ok
tegra-asoc: sound: ADMAIF20 ADMAIF20 mapping ok
u32 classifier
Actions configured
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
NET: Registered protocol family 15
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: netlink gateway (rev 20130117) max_hops=1
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
9pnet: Installing 9P2000 support
Key type dns_resolver registered
Registered cp15_barrier emulation handler
Registered setend emulation handler
registered taskstats version 1
isp 15600000.isp: initialized
nvcsi 150c0000.nvcsi: initialized
tegra-vi4 15700000.vi: using default number of vi channels,15
Wake83 for irq=51
gpio tegra-gpio-aon wake29 for gpio=56(FF:0)
input: gpio-keys as /devices/gpio-keys/input/input2
tegra-vi4 15700000.vi: initialized
tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--2 bound
tegra-vi4 15700000.vi: subdev 150c0000.nvcsi--1 bound
tegra-pcie 10003000.pcie-controller: link 2 down, retrying
tegra_rtc c2a0000.rtc: setting system clock to 2021-08-09 01:36:09 UTC (1628472969)
mmcblk mmc0:0001: Card claimed for testing.
usb 2-2: new SuperSpeed USB device number 2 using tegra-xusb
bpmp: mounted debugfs mirror
bwmgr: missing cdev-type property
usb 2-2: New USB device found, idVendor=0451, idProduct=8025
usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 2 ports detected
ALSA device list:
#0: tegra-hda at 0x3518000 irq 380
#1: tegra-snd-t186ref-mobile-rt565x
Freeing unused kernel memory: 8640K
Root device found: nvme0n1p1
usb 1-3: new full-speed USB device number 3 using tegra-xusb
usb 1-3: New USB device found, idVendor=8087, idProduct=0a2b
usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-2.1: new high-speed USB device number 4 using tegra-xusb
usb 1-2.1: New USB device found, idVendor=2109, idProduct=2813
usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.1: Product: USB2.0 Hub
usb 1-2.1: Manufacturer: VIA Labs, Inc.
hub 1-2.1:1.0: USB hub found
hub 1-2.1:1.0: 4 ports detected
tegra-pcie 10003000.pcie-controller: link 2 down, retrying
tegra-pcie 10003000.pcie-controller: link 2 down, ignoring
FAN rising trip_level:1 cur_temp:52900 trip_temps[2]:60000
usb 2-2.1: new SuperSpeed USB device number 3 using tegra-xusb
tegra-pcie 10003000.pcie-controller: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x40100000-0x47ffffff]
pci_bus 0000:00: root bus resource [mem 0x48000000-0x7fffffff pref]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:01.0: [10de:10e5] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
iommu: Adding device 0000:00:01.0 to group 53
arm-smmu: forcing sodev map for 0000:00:01.0
pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:01:00.0: [1b21:2812] type 01 class 0x060400
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
iommu: Adding device 0000:01:00.0 to group 54
arm-smmu: forcing sodev map for 0000:01:00.0
pci 0000:01:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:02:00.0: [1b21:2812] type 01 class 0x060400
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
iommu: Adding device 0000:02:00.0 to group 55
arm-smmu: forcing sodev map for 0000:02:00.0
pci 0000:02:02.0: [1b21:2812] type 01 class 0x060400
pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
iommu: Adding device 0000:02:02.0 to group 56
arm-smmu: forcing sodev map for 0000:02:02.0
pci 0000:02:03.0: [1b21:2812] type 01 class 0x060400
pci 0000:02:03.0: PME# supported from D0 D3hot D3cold
iommu: Adding device 0000:02:03.0 to group 57
arm-smmu: forcing sodev map for 0000:02:03.0
pci 0000:02:08.0: [1b21:2812] type 01 class 0x060400
pci 0000:02:08.0: PME# supported from D0 D3hot D3cold
iommu: Adding device 0000:02:08.0 to group 58
arm-smmu: forcing sodev map for 0000:02:08.0
pci 0000:02:0a.0: [1b21:2812] type 01 class 0x060400
pci 0000:02:0a.0: PME# supported from D0 D3hot D3cold
iommu: Adding device 0000:02:0a.0 to group 59
arm-smmu: forcing sodev map for 0000:02:0a.0
pci 0000:02:0b.0: [1b21:2812] type 01 class 0x060400
pci 0000:02:0b.0: PME# supported from D0 D3hot D3cold
iommu: Adding device 0000:02:0b.0 to group 60
arm-smmu: forcing sodev map for 0000:02:0b.0
pci 0000:02:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:02:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:02:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:02:08.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:02:0a.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:02:0b.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:03:00.0: [8086:24fd] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
iommu: Adding device 0000:03:00.0 to group 61
arm-smmu: forcing sodev map for 0000:03:00.0
pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03
pci 0000:04:00.0: [8086:1533] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [mem 0x00000000-0x0007ffff]
pci 0000:04:00.0: reg 0x18: [io 0x0000-0x001f]
pci 0000:04:00.0: reg 0x1c: [mem 0x00000000-0x00003fff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
iommu: Adding device 0000:04:00.0 to group 62
arm-smmu: forcing sodev map for 0000:04:00.0
pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04
pci 0000:05:00.0: [8086:1533] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x0007ffff]
pci 0000:05:00.0: reg 0x18: [io 0x0000-0x001f]
pci 0000:05:00.0: reg 0x1c: [mem 0x00000000-0x00003fff]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
iommu: Adding device 0000:05:00.0 to group 63
arm-smmu: forcing sodev map for 0000:05:00.0
pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 05
pci 0000:06:00.0: [1bc0:1002] type 00 class 0x010802
pci 0000:06:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
pci 0000:06:00.0: PME# supported from D0 D3hot
iommu: Adding device 0000:06:00.0 to group 64
arm-smmu: forcing sodev map for 0000:06:00.0
usb 2-2.1: New USB device found, idVendor=2109, idProduct=0813
usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2.1: Product: USB3.0 Hub
usb 2-2.1: Manufacturer: VIA Labs, Inc.
pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 06
pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 07
pci_bus 0000:08: busn_res: [bus 08-ff] end is updated to 08
pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 08
pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 08
pci 0000:00:01.0: BAR 14: assigned [mem 0x40100000-0x404fffff]
pci 0000:00:01.0: BAR 13: assigned [io 0x1000-0x2fff]
pci 0000:01:00.0: BAR 14: assigned [mem 0x40100000-0x404fffff]
pci 0000:01:00.0: BAR 13: assigned [io 0x1000-0x2fff]
pci 0000:02:00.0: BAR 14: assigned [mem 0x40100000-0x401fffff]
pci 0000:02:02.0: BAR 14: assigned [mem 0x40200000-0x402fffff]
pci 0000:02:03.0: BAR 14: assigned [mem 0x40300000-0x403fffff]
pci 0000:02:08.0: BAR 14: assigned [mem 0x40400000-0x404fffff]
pci 0000:02:02.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:02:03.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:03:00.0: BAR 0: assigned [mem 0x40100000-0x40101fff 64bit]
hub 2-2.1:1.0: USB hub found
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0: bridge window [mem 0x40100000-0x401fffff]
pci 0000:04:00.0: BAR 0: assigned [mem 0x40200000-0x4027ffff]
pci 0000:04:00.0: BAR 3: assigned [mem 0x40280000-0x40283fff]
pci 0000:04:00.0: BAR 2: assigned [io 0x1000-0x101f]
pci 0000:02:02.0: PCI bridge to [bus 04]
pci 0000:02:02.0: bridge window [io 0x1000-0x1fff]
pci 0000:02:02.0: bridge window [mem 0x40200000-0x402fffff]
pci 0000:05:00.0: BAR 0: assigned [mem 0x40300000-0x4037ffff]
pci 0000:05:00.0: BAR 3: assigned [mem 0x40380000-0x40383fff]
pci 0000:05:00.0: BAR 2: assigned [io 0x2000-0x201f]
pci 0000:02:03.0: PCI bridge to [bus 05]
pci 0000:02:03.0: bridge window [io 0x2000-0x2fff]
pci 0000:02:03.0: bridge window [mem 0x40300000-0x403fffff]
pci 0000:06:00.0: BAR 0: assigned [mem 0x40400000-0x40403fff 64bit]
pci 0000:02:08.0: PCI bridge to [bus 06]
pci 0000:02:08.0: bridge window [mem 0x40400000-0x404fffff]
hub 2-2.1:1.0: 4 ports detected
pci 0000:02:0a.0: PCI bridge to [bus 07]
pci 0000:02:0b.0: PCI bridge to [bus 08]
pci 0000:01:00.0: PCI bridge to [bus 02-08]
pci 0000:01:00.0: bridge window [io 0x1000-0x2fff]
pci 0000:01:00.0: bridge window [mem 0x40100000-0x404fffff]
pci 0000:00:01.0: PCI bridge to [bus 01-08]
pci 0000:00:01.0: bridge window [io 0x1000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0x40100000-0x404fffff]
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:02.0: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:03.0: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:08.0: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:0a.0: Signaling PME through PCIe PME interrupt
pci 0000:02:0b.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded
aer 0000:00:01.0:pcie002: service driver aer loaded
igb 0000:04:00.0: enabling device (0000 -> 0002)
pps_core: source ptp0 got cdev (248:0)
pps pps0: new PPS source ptp0
igb 0000:04:00.0: added PHC on eth1
igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:04:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 70:b3:d5:17:14:96
igb 0000:04:00.0: eth1: PBA No: 000300-000
igb 0000:04:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
igb 0000:05:00.0: enabling device (0000 -> 0002)
usb 1-2.2: new high-speed USB device number 5 using tegra-xusb
pps_core: source ptp1 got cdev (248:1)
pps pps1: new PPS source ptp1
igb 0000:05:00.0: added PHC on eth2
igb 0000:05:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:05:00.0: eth2: (PCIe:2.5Gb/s:Width x1) 70:b3:d5:17:14:97
igb 0000:05:00.0: eth2: PBA No: 000300-000
igb 0000:05:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
nvme nvme0: pci function 0000:06:00.0
nvme 0000:06:00.0: enabling device (0000 -> 0002)
usb 1-2.2: New USB device found, idVendor=0781, idProduct=5591
usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2.2: Product: Ultra USB 3.0
usb 1-2.2: Manufacturer: SanDisk
usb 1-2.2: SerialNumber: 0101a0a04fdff8c43af00ff96887c27d98f9bfc0db24893b11e4c7033f84c78c0c45000000000000000000004cd27becff8b2d009155810787270b4b
usb-storage 1-2.2:1.0: USB Mass Storage device detected
scsi host0: usb-storage 1-2.2:1.0
usb 1-2.1.4: new full-speed USB device number 6 using tegra-xusb
Primary GPT is invalid, using alternate GPT.
nvme0n1: p1 p2
usb 1-2.1.4: New USB device found, idVendor=046d, idProduct=c534
usb 1-2.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.1.4: Product: USB Receiver
usb 1-2.1.4: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/3530000.xhci/usb1/1-2/1-2.1/1-2.1.4/1-2.1.4:1.0/0003:046D:C534.0001/input/input3
usb 2-2.1: usb_suspend_both: status 0
hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-3530000.xhci-2.1.4/input0
input: Logitech USB Receiver as /devices/3530000.xhci/usb1/1-2/1-2.1/1-2.1.4/1-2.1.4:1.1/0003:046D:C534.0002/input/input4
usb 2-2: usb_suspend_both: status 0
usb usb2: usb_suspend_both: status 0
hid-generic 0003:046D:C534.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-3530000.xhci-2.1.4/input1
Found dev node: /dev/nvme0n1p1
EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null)
Rootfs mounted over nvme0n1p1
Switching from initrd to actual rootfs
ip_tables: (C) 2000-2006 Netfilter Core Team
cgroup: cgroup2: unknown option "nsdelegate"
systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture arm64.
systemd[1]: No hostname configured.
systemd[1]: Set hostname to .
systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
systemd[1]: Configuration file /etc/systemd/system/serial-getty@ttyS0.service.d/autologin.conf is marked executable. Please remove executable permission bits. Proceeding anyway.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Reached target Swap.
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Created slice User and Session Slice.
EXT4-fs (nvme0n1p1): re-mounted. Opts: (null)
bcpu-throttle-alert cooling device registered.
mcpu-throttle-alert cooling device registered.
gpu-throttle-alert cooling device registered.
scsi 0:0:0:0: Direct-Access SanDisk Ultra USB 3.0 1.00 PQ: 0 ANSI: 6
sd 0:0:0:0: [sda] 120176640 512-byte logical blocks: (61.5 GB/57.3 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI removable disk
systemd-journald[2345]: Received request to flush runtime journal from PID 1
using random self ethernet address
using random host ethernet address
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
Mass Storage Function, version: 2009/09/11
LUN: removable file: (no medium)
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
using random self ethernet address
using random host ethernet address
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
rndis0: HOST MAC 22:4e:15:e4:fe:f8
rndis0: MAC 22:4e:15:e4:fe:f9
usb0: HOST MAC 22:4e:15:e4:fe:fa
usb0: MAC 22:4e:15:e4:fe:fb
tegra-xudc-new 3550000.xudc: ep 0 (type: 0, dir: out) enabled
l4tbr0: port 1(rndis0) entered blocking state
l4tbr0: port 1(rndis0) entered disabled state
device rndis0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
CPU1: shutdown
psci: CPU1 killed.
CPU2: shutdown
psci: CPU2 killed.
spidev: module is already loaded
spidev: module is already loaded
gpio tegra-gpio-aon wake51 for gpio=47(AA:7)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
l4tbr0: port 2(usb0) entered blocking state
l4tbr0: port 2(usb0) entered disabled state
device usb0 entered promiscuous mode
zram: Added device: zram0
zram: Added device: zram1
IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
zram: Added device: zram2
zram: Added device: zram3
zram0: detected capacity change from 0 to 501395456
Adding 489640k swap on /dev/zram0. Priority:5 extents:1 across:489640k SS
zram1: detected capacity change from 0 to 501395456
Adding 489640k swap on /dev/zram1. Priority:5 extents:1 across:489640k SS
zram2: detected capacity change from 0 to 501395456
Adding 489640k swap on /dev/zram2. Priority:5 extents:1 across:489640k SS
zram3: detected capacity change from 0 to 501395456
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:03:00.0: enabling device (0000 -> 0002)
iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8265-26.ucode failed with error -2
iwlwifi 0000:03:00.0: Falling back to user helper
Adding 489640k swap on /dev/zram3. Priority:5 extents:1 across:489640k SS
tegradc 15200000.nvdisplay: unblank
tegradc 15210000.nvdisplay: blank - powerdown
usbcore: registered new interface driver btusb
Bluetooth: hci0: Firmware revision 0.1 build 226 week 17 2018
fuse init (API version 7.26)
eqos 2490000.ether_qos eth0: Link is Up - 1Gbps/Full - flow control off
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8265-25.ucode failed with error -2
iwlwifi 0000:03:00.0: Falling back to user helper
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP socket layer initialized
iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8265-24.ucode failed with error -2
iwlwifi 0000:03:00.0: Falling back to user helper
iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8265-23.ucode failed with error -2
iwlwifi 0000:03:00.0: Falling back to user helper
iwlwifi 0000:03:00.0: loaded firmware version 22.391740.0 op_mode iwlmvm
iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
thermal thermal_zone6: failed to read out thermal zone (-5)
thermal thermal_zone6: Registering thermal zone thermal_zone6 for type iwlwifi
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
tegradc 15200000.nvdisplay: unblank
tegradc 15210000.nvdisplay: blank - powerdown
EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
iwlwifi 0000:03:00.0: Getting the temperature timed out
vdd-3v3-cvb: disabling
vdd-3v3-cvb: disabling
vdd-1v8-cvb: disabling
vdd-fan: disabling
vdd_sys_en: disabling
spmic-ldo1: disabling
vddio-sdmmc1: disabling
avdd-ts-hv: disabling
vdd-sys-bl: disabling
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
CPU1: Booted secondary processor [4e0f0030]
CPU2: Booted secondary processor [4e0f0030]
CPU1: shutdown
psci: CPU1 killed.
CPU2: shutdown
psci: CPU2 killed.
CPU1: Booted secondary processor [4e0f0030]
CPU2: Booted secondary processor [4e0f0030]
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
usb 1-2.2: USB disconnect, device number 5
usb 2-2.2: new SuperSpeed USB device number 4 using tegra-xusb
usb 2-2.2: New USB device found, idVendor=196d, idProduct=0201
usb 2-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-2.2: Product: USB Drive 3ME
usb 2-2.2: Manufacturer: Innodisk
usb 2-2.2: SerialNumber: 20191123AA10H7392008
usb-storage 2-2.2:1.0: USB Mass Storage device detected
scsi host0: usb-storage 2-2.2:1.0
scsi 0:0:0:0: Direct-Access Innodisk USB Drive 3ME 0917 PQ: 0 ANSI: 6
sd 0:0:0:0: [sda] 31686656 512-byte logical blocks: (16.2 GB/15.1 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 22 00 00 00
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Attached SCSI removable disk
EXT4-fs (sda): recovery complete
EXT4-fs (sda): mounted filesystem with ordered data mode. Opts: (null)
iwlwifi 0000:03:00.0: Getting the temperature timed out
tegradc 15200000.nvdisplay: blank - powerdown
extcon-disp-state external-connection:disp-state: cable 47 state 0
Extcon AUX1(HDMI) disable
tegra_nvdisp_handle_pd_disable: Powergated Head1 pd
tegra_nvdisp_handle_pd_disable: Powergated Head0 pd
iwlwifi 0000:03:00.0: Getting the temperature timed out
extcon-disp-state external-connection:disp-state: cable 51 state 0
Extcon HDMI: HPD disabled
tegradc 15200000.nvdisplay: hdmi: unplugged
tegradc 15200000.nvdisplay: blank - powerdown
tegradc 15200000.nvdisplay: unblank
tegradc 15200000.nvdisplay: unblank
tegradc 15210000.nvdisplay: blank - powerdown
tegradc 15200000.nvdisplay: blank - powerdown
tegradc 15200000.nvdisplay: unblank
tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd
tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd
Parent Clock set for DC plld2
tegradc 15200000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m
tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID.
extcon-disp-state external-connection:disp-state: cable 47 state 1
Extcon AUX1(HDMI) enable
extcon-disp-state external-connection:disp-state: cable 51 state 1
Extcon HDMI: HPD enabled
tegradc 15200000.nvdisplay: hdmi: plugged
tegradc 15200000.nvdisplay: unblank
tegradc 15210000.nvdisplay: blank - powerdown
tegradc 15200000.nvdisplay: unblank
tegradc 15210000.nvdisplay: blank - powerdown
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
tegradc 15200000.nvdisplay: blank - powerdown
extcon-disp-state external-connection:disp-state: cable 47 state 0
Extcon AUX1(HDMI) disable
tegra_nvdisp_handle_pd_disable: Powergated Head1 pd
tegra_nvdisp_handle_pd_disable: Powergated Head0 pd
extcon-disp-state external-connection:disp-state: cable 51 state 0
Extcon HDMI: HPD disabled
tegradc 15200000.nvdisplay: hdmi: unplugged
tegradc 15200000.nvdisplay: blank - powerdown
tegradc 15200000.nvdisplay: unblank
tegradc 15200000.nvdisplay: unblank
tegradc 15210000.nvdisplay: blank - powerdown
tegradc 15200000.nvdisplay: blank - powerdown
tegradc 15200000.nvdisplay: unblank
tegra_nvdisp_handle_pd_enable: Unpowergated Head0 pd
tegra_nvdisp_handle_pd_enable: Unpowergated Head1 pd
Parent Clock set for DC plld2
tegradc 15200000.nvdisplay: hdmi: tmds rate:148500K prod-setting:prod_c_hdmi_111m_223m
tegradc 15200000.nvdisplay: hdmi: get YCC quant from EDID.
extcon-disp-state external-connection:disp-state: cable 47 state 1
Extcon AUX1(HDMI) enable
extcon-disp-state external-connection:disp-state: cable 51 state 1
Extcon HDMI: HPD enabled
tegradc 15200000.nvdisplay: hdmi: plugged
tegradc 15200000.nvdisplay: unblank
tegradc 15210000.nvdisplay: blank - powerdown
tegradc 15200000.nvdisplay: unblank
tegradc 15210000.nvdisplay: blank - powerdown
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out
iwlwifi 0000:03:00.0: Getting the temperature timed out